Walton Primo G9
The Walton G9 is a smartphone released by the Bangladeshi electronics manufacturer Walton. It boasts a number of impressive features, including a 6.5-inch Full HD+ IPS display, a powerful Octa-core processor, and a large 5000mAh battery.
One of the standout features of the Walton G9 is its software system. The phone has a dual rear camera setup, with a 48-megapixel primary sensor, a 5-megapixel ultra-wide-angle lens, and a 2-megapixel depth sensor. This allows for excellent photography, with sharp and detailed images, even in low light conditions. The front-facing camera is also impressive, with a 16-megapixel sensor that is perfect for selfies and video calls.Walton Primo G9 Hang Logo Fix Flash File
In terms of performance, the Walton G9 is powered by an Octa-core processor and has 6GB of RAM. This allows for smooth and fast performance, with quick app launches and seamless multitasking. The phone also has a generous 128GB of internal storage, which can be expanded further with a microSD card.
What is the CPU of Walton Primo G9?
The Walton Primo G9 is powered by a Spreadtrum SPD SC7731E processor. The SPD SC7731E is a mid-range chipset that was released by SPD in 2019. It is built on a 12nm process and features eight ARM Cortex-A53 cores that are clocked at up to 1.8GHz. The chipset also includes an IMG PowerVR GE8320 GPU, which provides decent graphics performance for gaming and other graphics-intensive tasks.
Overall, the SC7731E is a capable chipset that provides good performance for mid-range smartphones like the Walton Primo G9. It is also relatively power-efficient, which helps to prolong the phone’s battery life. Other notable features of the Walton Primo G9’s processor include support for dual-SIM 4G LTE connectivity, Bluetooth 5.0, and Wi-Fi 802.11ac.
Walton Primo G9 Frp Privacy Unlock & Fastboot FIX solution
If you are experiencing an FRP (Factory Reset Protection) lock issue on your Walton Primo G9, there are a few steps you can take to fix the problem:
- First, make sure that you have a Google account that is associated with the phone. This is the account that was used to set up the device.
- If you have forgotten your Google account credentials, you can reset your password by visiting the Google Account Recovery page.
- Next, try to perform a factory reset on your device. This can be done by going to Settings > System > Reset Options > Erase All Data (Factory Reset). This will erase all the data on your device and restore it to its factory settings.
- If the FRP lock issue persists after performing a factory reset, you can try using a tool like “Google Account Manager” to bypass the lock. You can download this tool from a trusted source and follow the instructions to install it on your device.
As for the Fastboot issue, if your device is stuck in fast boot mode, you can try the following steps to fix the problem:
- Connect your device to your computer via a USB cable.
- Open a command prompt or terminal window on your computer and enter the command “fastboot devices” to make sure that your device is detected.
- If your device is detected, enter the command “fastboot reboot” to restart your device. This should bring it out of Fastboot mode.
walton primo g9 boot file
To flash a Walton Primo G9 with SPD (Spreadtrum) chipset, you can follow these general steps:
- Download and install the latest SPD USB driver on your computer.
- Download and extract the firmware/stock ROM for your Walton Primo G9 with the SPD chipset.
- Power off your Walton Primo G9.
- Download and install the SPD USB driver on your computer.
- Extract the firmware/stock ROM for your Walton Primo G9.
- Download and launch the SPD Upgrade Download or Research Download tool on your computer.
- Once the tool is launched, click on the “Load Packet” or “Load P5C” button and select the firmware/stock ROM file you downloaded earlier.
- Click on the “Start” button to begin the flashing process.
- Connect your Walton Primo G9 to the computer using a USB cable while holding down the volume down button or volume up button.
- The flashing process will start automatically and you will see a progress bar.
- Once the flashing process is completed, you will see a “Passed” message.
- Disconnect your phone from the computer and power it on.
Note: The above steps are general guidelines for flashing a Walton Primo G9 with an SPD chipset. The actual steps may vary depending on the specific firmware/stock ROM file and tool you are using. Make sure to back up your important data before flashing and use the correct firmware/stock ROM file for your device.
|Walton g9 hang and lcd fix file S06_14082019||Download|
|Walton g9 Frp reset File||Download|
you can see more posts: Vivo Y11 1906 Flash File without Password